Dell Equallogic PS4110X PS4110 Hardware Owners Manual - Page 34

Inserting the MicroSD Card, Ejecting the MicroSD Card

Get Dell Equallogic PS4110X PDF manuals and user guides View all Dell Equallogic PS4110X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Hardware Owner's Manual 3 Maintaining Control Modules 1. Firmly push the card into its housing to release the spring mechanism (callout 2 in Figure 20). The microSD card will be partially ejected from the housing. 2. Gently pull the card straight out of the housing (callout 3 in Figure 20). 3. Place the microSD card on a flat surface where it will be protected from electrostatic charge. Figure 20: Ejecting the MicroSD Card Inserting the MicroSD Card 1. Align the replacement microSD card so the arrow on the card points towards the housing (Figure 21). When correctly positioned, the gold contacts will be facing downward, and inward towards the housing. 2. Firmly press the card into the housing until it clicks into place. Confirm that the card is securely seated by pulling gently on the card afterwards. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Hardware Owner's Manual
3 Maintaining Control Modules
1.
Firmly push the card into its housing to release the spring mechanism (callout 2 in
Figure 20
). The microSD
card will be partially ejected from the housing.
2.
Gently pull the card straight out of the housing (callout 3 in
Figure 20
).
3.
Place the microSD card on a flat surface where it will be protected from electrostatic charge.
Figure 20: Ejecting the MicroSD Card
Inserting the MicroSD Card
1.
Align the replacement microSD card so the arrow on the card points towards the housing (
Figure 21
). When
correctly positioned, the gold contacts will be facing downward, and inward towards the housing.
2.
Firmly press the card into the housing until it clicks into place. Confirm that the card is securely seated by
pulling gently on the card afterwards.
30