Dell Equallogic PS4110X PS4110 Hardware Owners Manual - Page 36

Hardware Steps, Management Port Location

Get Dell Equallogic PS4110X PDF manuals and user guides View all Dell Equallogic PS4110X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Hardware Owner's Manual 3 Maintaining Control Modules Note: This is considered an advanced configuration, available if your environment requires this level of security. Hardware Steps 1. Make sure your network environment can support a dedicated management network, with a subnet that is separate from the subnets for iSCSI traffic. 2. On both control modules, connect the port labeled MANAGEMENT to the management network. The location of the management port is shown in the following figure. Figure 22: Management Port Location Software Steps See the PS Series Group Administration guide for the procedure to configure the management network in the Group Manager GUI. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Hardware Owner's Manual
3 Maintaining Control Modules
Note:
This is considered an advanced configuration, available if your environment requires this level of security.
Hardware Steps
1.
Make sure your network environment can support a dedicated management network, with a subnet that is
separate from the subnets for iSCSI traffic.
2.
On both control modules, connect the port labeled MANAGEMENT to the management network. The
location of the management port is shown in the following figure.
Figure 22: Management Port Location
Software Steps
See the
PS Series Group Administration
guide for the procedure to configure the management network in the
Group Manager GUI.
32