Dell Inspiron 8000 Solutions Guide - Page 56
of the memory module connector., Use your fingernails to carefully spread apart the inner metal tabs - will not boot
View all Dell Inspiron 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
www.dell.com | support.dell.com NOTICE: To prevent damage to the computer, do not use tools to spread the inner metal tabs of the connector when you are installing or removing a memory module. 6 If you are replacing a memory module, you must remove the existing module: a Use your fingernails to carefully spread apart the inner metal tabs of the memory module connector. The module should pop up. b Lift the memory module away from the connector. HINT: If the memory module is not installed properly, the computer will not boot. No error message indicates this failure. securing clip memory module 7 Install the memory module: a Align the notch in the module with the slot in the center of the connector. b Slide the edge of the module firmly into the connector, and rotate the module down until you hear a click. 56 Adding Parts