Dell Latitude 7350 Detachable Owners Manual - Page 107
User-facing camera, Removing the user-facing camera
View all Dell Latitude 7350 Detachable manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
f. Place the Darwin 1-antenna cable bracket on the system. g. Route the white/grey WWAN main antenna cable and black/grey WWAN auxiliary antenna cable through the routing channels and metal clips on the system board. h. Replace the two screws (M1.6x2.5) that secure the Darwin 1-antenna cable bracket to the top-right of the system board. Next steps 1. Install the world-facing camera. 2. Install the kick-stand hinges. 3. Install the heat sink. 4. Install the battery. 5. Install the right fan. 6. Install the left fan. 7. Install the WWAN card. 8. Install the solid-state drive. 9. Install the display assembly. 10. Install the SIM-card tray. 11. Follow the procedure in After working inside your computer. User-facing camera Removing the user-facing camera CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SIM-card tray 3. Remove the display assembly. 4. Remove the solid-state drive. 5. Remove the WWAN card. 6. Remove the left fan. 7. Remove the right fan. 8. Remove the battery. 9. Remove the heat sink. 10. Remove the kick-stand hinges. 11. Remove the world-facing camera. 12. Remove the system board. About this task The following images indicate the location of the user-facing camera and provide a visual representation of the removal procedure. Removing and installing Field Replaceable Units (FRUs) 107