Dell Latitude 7350 Detachable Owners Manual - Page 98
About this task, Steps, Next steps, Installing the power-button board
View all Dell Latitude 7350 Detachable manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
About this task The following images indicate the location of the power-button board and provide a visual representation of the installation procedure. Figure 62. Installing the power-button board Steps 1. Connect the power-button daughter board FPC to the connector (MB) on the power-button board and close the latch. 2. Place the power-button board along with its FPC into position. 3. Adhere the power-button board FPC to the right fan. 4. Replace the two screws (M1.6x1.5) that secure the power-button board into position. 5. Connect the power-button board FPC to the connector (SIM Board) on the system board and close the latch. 6. For computers installed with a fingerprint reader, connect the fingerprint-reader FPC to the connector (FPR) on the power-button board and close the latch. NOTE: Skip this step if your computer does not have a fingerprint reader installed. Next steps 1. Install the display assembly. 2. Install the SIM-card tray. 98 Removing and installing Field Replaceable Units (FRUs)