Dell Latitude 7350 Detachable Owners Manual - Page 82
Installing the heat sink Vapor Chamber, Steps, Next steps
View all Dell Latitude 7350 Detachable manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Figure 50. Installing the heat sink (Vapor Chamber) Steps 1. Place the heat sink on the system board, aligning the screw holes on the heat sink with the screw holes on the system board. 2. Replace the three screws (M1.6x2.3) that secure the that secure the heat sink to the system board 3. Adhere the WLAN and WWAN antenna grounding foil (for computers with WWAN support) to the heat sink. Next steps 1. Install the display assembly. 2. Install the SIM-tray card. 3. Follow the procedure in After working inside your computer. 82 Removing and installing Field Replaceable Units (FRUs)
Figure 50. Installing the heat sink (Vapor Chamber)
Steps
1.
Place the heat sink on the system board, aligning the screw holes on the heat sink with the screw holes on the system
board.
2.
Replace the three screws (M1.6x2.3) that secure the that secure the heat sink to the system board
3.
Adhere the WLAN and WWAN antenna grounding foil (for computers with WWAN support) to the heat sink.
Next steps
1.
Install the
display assembly
.
2.
Install the
SIM-tray card
.
3.
Follow the procedure in
After working inside your computer
.
82
Removing and installing Field Replaceable Units (FRUs)