Dell Latitude 7350 Detachable Owners Manual - Page 68

Installing the right fan, About this task, Steps

Page 68 highlights

About this task The following images indicate the location of the right fan and provide a visual representation of the removal procedure. Figure 36. Removing the right fan Steps 1. Open the latch and disconnect the power button daughter board FPC from the connector (SIM) on the system board. 2. Peel the power button daughter board FPC away from the right fan. 3. Open the latch and disconnect the right-fan cable from the connector (FAN) on the system board. 4. Slightly lift the right fan from its bottom side and slide it downward to release it. 5. Lift the right fan out of the computer. Installing the right fan CAUTION: The information in this installation section is intended for authorized service technicians only. Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The followingimages indicate the location of the right fan and provide a visual representation of the installation procedure. 68 Removing and installing Field Replaceable Units (FRUs)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149

About this task
The following images indicate the location of the right fan and provide a visual representation of the removal procedure.
Figure 36. Removing the right fan
Steps
1.
Open the latch and disconnect the power button daughter board FPC from the connector (SIM) on the system board.
2.
Peel the power button daughter board FPC away from the right fan.
3.
Open the latch and disconnect the right-fan cable from the connector (FAN) on the system board.
4.
Slightly lift the right fan from its bottom side and slide it downward to release it.
5.
Lift the right fan out of the computer.
Installing the right fan
CAUTION:
The information in this installation section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The followingimages indicate the location of the right fan and provide a visual representation of the installation procedure.
68
Removing and installing Field Replaceable Units (FRUs)