Dell Latitude 7350 Detachable Owners Manual - Page 97
Installing the power-button board, Removing the power-button board
View all Dell Latitude 7350 Detachable manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Figure 61. Removing the power-button board Steps 1. For computers installed with a fingerprint reader, open the latch and disconnect the fingerprint-reader FPC from the connector (FPR) on the power-button board. NOTE: Skip to the next step if your computer does not have a fingerprint reader installed. 2. Open the latch and disconnect the power-button board FPC from the connector (SIM Board) on the system board. 3. Peel off the power-button board FPC from the right fan. 4. Remove the two screws (M1.6x1.5) that secure the power-button board into position. 5. Remove the power-button board along with its FPC from the computer. 6. Open the latch and disconnect the power-button board FPC from the connector (MB) on the power-button board. Installing the power-button board CAUTION: The information in this installation section is intended for authorized service technicians only. Removing and installing Field Replaceable Units (FRUs) 97