Dell Latitude 7350 Detachable Owners Manual - Page 64

Prerequisites, About this task, Steps, Connectors on the WWAN, Antenna-cable color, Silkscreen marking

Page 64 highlights

Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the WWAN card and provides a visual representation of the installation procedure. Figure 32. Installing the WWAN card Steps 1. Align the notch on the WWAN card with the tab on the WWAN slot (WWAN) on the system board. 2. Slide the WWAN card at an angle into the WWAN slot on the system board. 3. Connect the antenna cables to the WWAN card. The following table provides the antenna-cable color scheme: Table 33. Antenna-cable color scheme for WWAN card Connectors on the WWAN Antenna-cable color card M White with a thin gray stripe Main WWAN M1 Blue MIMO2 WWAN Silkscreen marking △ (white triangle) △ (white triangle) 64 Removing and installing Field Replaceable Units (FRUs)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the WWAN card and provides a visual representation of the installation procedure.
Figure 32. Installing the WWAN card
Steps
1.
Align the notch on the WWAN card with the tab on the WWAN slot (WWAN) on the system board.
2.
Slide the WWAN card at an angle into the WWAN slot on the system board.
3.
Connect the antenna cables to the WWAN card.
The following table provides the antenna-cable color scheme:
Table 33. Antenna-cable color scheme for WWAN card 
Connectors on the WWAN
card
Antenna-cable color
Silkscreen marking
M
White with a thin gray stripe
Main WWAN
(white triangle)
M1
Blue
MIMO2 WWAN
(white triangle)
64
Removing and installing Field Replaceable Units (FRUs)