Dell Latitude 7350 Detachable Owners Manual - Page 52
Installing the display assembly
View all Dell Latitude 7350 Detachable manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
14. Gently pull back the battery-cable connector, ensuring that the battery is disconnected from the interposer board. 15. Remove the interposer board from the system board. CAUTION: Remove the interposer board immediately after disconnecting the battery to prevent the board from falling out of the computer during replacement procedures. The pins on the interposer board are very fragile. Avoid contact with the pins on the interposer board and DO NOT allow the pins to come into contact with any substance that may stain or contaminate the pins. Handle the interposer board by lifting and holding from the edges or the sides. NOTE: Be sure to set the interposer board aside for replacement procedures. Installing the display assembly CAUTION: The information in this installation section is intended for authorized service technicians only. Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the display assembly and provides a visual representation of the installation procedure. Figure 20. Installing the display assembly 52 Removing and installing Field Replaceable Units (FRUs)