Dell Latitude 7350 Detachable Owners Manual - Page 58
Installing the docking connector, Prerequisites, About this task, Steps
View all Dell Latitude 7350 Detachable manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SIM-card tray. 3. Remove the display assembly. About this task The following images indicate the location of the docking connector and provide a visual representation of the removal procedure. Figure 26. Removing the docking connector Steps 1. Open the latch and disconnect the docking-connector FPC from the connector (Pogo Pin) on the system board. 2. Peel the docking-connector FPC from the battery. 3. Remove the two screws (M1.6x3) that secure the docking-connector bracket to the back cover. 4. Lift away the docking-connector bracket and slide the docking connector out of the computer. Installing the docking connector CAUTION: The information in this installation section is intended for authorized service technicians only. 58 Removing and installing Field Replaceable Units (FRUs)