Dell Latitude 7350 Detachable Owners Manual - Page 91
World-facing camera, Removing the world-facing camera
View all Dell Latitude 7350 Detachable manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Figure 56. Installing the kick-stand hinges Steps 1. Place the kick-stand hinges into position and align the screw holes on the hinges with the screw holes on the back-cover assembly. 2. Replace the four screws (M1.6x3) and six screws (M2x2) that secure the kick stand and kick-stand hinges to the back-cover assembly. Next steps 1. Install the display assembly. 2. Install the SIM-card tray. 3. Follow the procedure in After working inside your computer. World-facing camera Removing the world-facing camera CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SIM-card tray 3. Remove the display assembly. 4. Remove the heat sink. About this task The following images indicate the location of the world-facing camera and provide a visual representation of the removal procedure. Removing and installing Field Replaceable Units (FRUs) 91