Dell Latitude 7350 Detachable Owners Manual - Page 89
Kick-stand hinges, Removing the kick-stand hinges
View all Dell Latitude 7350 Detachable manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
5. Route the black/grey WWAN auxiliary antenna cable through the routing channels on the system board. 6. Connect the green WWAN P-sensor cable to the connector (P-sensor) on the system board. 7. Connect the antenna cables to the WWAN card. The following table provides the antenna-cable color scheme: Table 35. Antenna-cable color scheme for WWAN card Connectors on the WWAN card M M1 M2 D/G Antenna-cable color White with a thin gray stripe Blue Orange Black with a thin gray stripe Main WWAN MIMO2 WWAN MIMO3 WWAN Auxiliary WWAN Silkscreen marking △ (white triangle) △ (white triangle) △ (white triangle) △ (white triangle) 8. Tighten the captive screw (M1.6x2.5) that secures the WWAN-card bracket to the WWAN card. 9. Adhere the HALL-sensor FPC to the battery. 10. Connect the HALL-sensor FPC to the connector (Kickstand Detect) on the system board and close the latch. Next steps 1. Install the display assembly. 2. Install the SIM-card tray. 3. Follow the procedure in After working inside your computer. Kick-stand hinges Removing the kick-stand hinges CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SIM-card tray. 3. Remove the display assembly. About this task The following images indicate the location of the kick-stand hinges and provide a visual representation of the removal procedure. Removing and installing Field Replaceable Units (FRUs) 89