Dell PowerEdge 1955 Configuration Guide - Page 10
See Serial or Telnet Console Interface - raid
View all Dell PowerEdge 1955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Figure 1-3. KVM Module Basic Configuration 1 6 5 2 4 3 1 monitor 4 DRAC/MC module 2 custom KVM cable 5 mouse 3 KVM module 6 keyboard 4 If required, configure the hard drives for RAID 1 or integrated mirroring. Configure RAID 1 prior to installation of the operating system. See "Configuring Drive Mirroring" on page 9 for more information. NOTE: If you ordered your server module configured for RAID 1, the drives in your server module are already configured. 5 If required, set up console redirection on the server module to either the BMC or to the DRAC/MC module serial port in the server module System Setup program. See "Serial or Telnet Console Interface" on page 14. 8 General System Configuration
8
General System Configuration
Figure 1-3.
KVM Module Basic Configuration
4
If required, configure the hard drives for RAID 1 or integrated mirroring. Configure RAID 1
prior to installation of the operating system. See "Configuring Drive Mirroring" on page 9
for more information.
NOTE:
If you ordered your server module configured for RAID 1, the drives in your server module
are already configured.
5
If required, set up console redirection on the server module to either the BMC or
to the DRAC/MC module serial port in the server module System Setup program.
See "Serial or Telnet Console Interface" on page 14.
1
monitor
2
custom KVM cable
3
KVM module
4
DRAC/MC module
5
mouse
6
keyboard
1
6
5
3
4
2