Dell PowerEdge 1955 Configuration Guide - Page 50
Using the RACADM Command Line Interface to Update the KVM Firmware
View all Dell PowerEdge 1955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Using the RACADM Command Line Interface to Update the KVM Firmware NOTE: You can download a TFTP server from http://solarwinds.net. For information on installing and configuring the SolarWinds TFTP server, refer to the SolarWinds website. 1 Copy the KVM firmware binary file to a TFTP server root directory. 2 Log on to the DRAC/MC Telnet or serial interface. See "Serial or Telnet Console Interface" on page 14 3 Enter the racadm fwupdate command, as in the following example: racadm fwupdate -a -d -m kvm 4 The TFTP download and firmware update process may take several minutes. After the update completes, the KVM resets. 48 Configuring the KVM Switch Module
48
Configuring the KVM Switch Module
Using the RACADM Command Line Interface to Update the KVM Firmware
NOTE:
You can download a TFTP server from
http://solarwinds.net
.
For information on installing
and configuring the SolarWinds TFTP server, refer to the SolarWinds website.
1
Copy the KVM firmware binary file to a TFTP server root directory.
2
Log on to the DRAC/MC Telnet or serial interface.
See "Serial or Telnet Console Interface" on page 14
3
Enter the
racadm fwupdate
command, as in the following example:
racadm fwupdate -a <
TFTP_IP_Address
> -d <
kvm_firmware_name
> -m
kvm
4
The TFTP download and firmware update process may take several minutes. After the update
completes, the KVM resets.