Dell PowerEdge C6520 EMC Installation and Service Manual - Page 47
Installing the riser card
View all Dell PowerEdge C6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Figure 51. Removing the riser card from riser 2 Next steps Replace the riser card. Installing the riser card Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. Steps 1. Align and insert the riser card with the screw holes on the riser. 2. Using a Phillips #2 screwdriver, tighten the screws that secure the riser card to the expansion card riser. NOTE: The procedure to install the riser 1B card is similar to installing the riser 1A card. Installing and removing system components 47
Figure 51. Removing the riser card from riser 2
Next steps
Replace the riser card
.
Installing the riser card
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
Steps
1.
Align and insert the riser card with the screw holes on the riser.
2.
Using a Phillips #2 screwdriver, tighten the screws that secure the riser card to the expansion card riser.
NOTE:
The procedure to install the riser 1B card is similar to installing the riser 1A card.
Installing and removing system components
47