Dell PowerEdge C6520 EMC Installation and Service Manual - Page 61
Loosening the screws and set the Anti-Tilt wires to the unlocked position,
![]() |
View all Dell PowerEdge C6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
c. Repeat the procedure for the remaining two screws. d. Return to the first screw to loosen it completely. 2. Set the Anti-Tilt wires to the unlocked position (inward position). Figure 65. Loosening the screws and set the Anti-Tilt wires to the unlocked position 3. Lift the processor and heat sink module (PHM) from the system and set the PHM aside with the processor side facing up. Figure 66. Removing a processor and heat sink module Installing and removing system components 61
![](/manual_guide/products/dell-poweredge-c6520-emc-installation-service-manual-952243c/61.png)
c.
Repeat the procedure for the remaining two screws.
d.
Return to the first screw to loosen it completely.
2.
Set the Anti-Tilt wires to the unlocked position (inward position).
Figure 65. Loosening the screws and set the Anti-Tilt wires to the unlocked position
3.
Lift the processor and heat sink module (PHM) from the system and set the PHM aside with the processor side facing up.
Figure 66. Removing a processor and heat sink module
Installing and removing system components
61