Dell PowerEdge C6520 EMC Installation and Service Manual - Page 51
M.2 SSD module, Removing the M.2 riser
![]() |
View all Dell PowerEdge C6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
M.2 SSD module Removing the M.2 riser Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the air shroud. Steps 1. Using a Phillips #2 screwdriver, remove the screw that secures the riser to the chassis. 2. Holding the blue tag, lift the riser to disengage the riser from the connector on the system board. 3. Disconnect the SATA cable from the riser. Figure 56. Removing the M.2 riser Next steps Replace the M.2 riser. Installing the M.2 riser Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the air shroud. Installing and removing system components 51
![](/manual_guide/products/dell-poweredge-c6520-emc-installation-service-manual-952243c/51.png)