Dell PowerEdge C6520 EMC Installation and Service Manual - Page 65
Press the retaining clip on the four sides, Applying thermal grease
![]() |
View all Dell PowerEdge C6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Figure 71. Press the retaining clip on the four sides 4. If you are using an existing heat sink, remove the thermal grease on the heat sink by using a clean lint-free cloth. 5. Use the thermal grease syringe included with your processor kit to apply the grease in a thin spiral on the bottom of the heat sink. Figure 72. Applying thermal grease CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and contaminating the processor socket. NOTE: The thermal grease syringe is intended for single use only. Dispose of the syringe after you use it. 6. For new heat sink. remove the Thermal Interface Material (TIM) protective film from the base of heat sink. Installing and removing system components 65
![](/manual_guide/products/dell-poweredge-c6520-emc-installation-service-manual-952243c/65.png)
Figure 71. Press the retaining clip on the four sides
4.
If you are using an existing heat sink, remove the thermal grease on the heat sink by using a clean lint-free cloth.
5.
Use the thermal grease syringe included with your processor kit to apply the grease in a thin spiral on the bottom of the heat
sink.
Figure 72. Applying thermal grease
CAUTION:
Applying too much thermal grease can result in excess grease coming in contact with and
contaminating the processor socket.
NOTE:
The thermal grease syringe is intended for single use only. Dispose of the syringe after you use it.
6.
For new heat sink. remove the Thermal Interface Material (TIM) protective film from the base of heat sink.
Installing and removing system components
65