Dell PowerEdge T140 EMC Installation and Service Manual - Page 44
Removing a drive from the drive carrier
View all Dell PowerEdge T140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Figure 14. Installing the drive carrier into the drive bay Next steps 1. Connect the power and data cables on the drive carrier. 2. Follow the procedure that is listed in After working inside your system. Removing a drive from the drive carrier Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. 3. Remove a 3.5-inch drive carrier from the drive bay. Steps Flex the drive bracket and remove the drive from the carrier. 44 PowerEdge T140 installing and removing system components
Figure 14. Installing the drive carrier into the drive bay
Next steps
1.
Connect the power and data cables on the drive carrier.
2.
Follow the procedure that is listed in
After working inside your system
.
Removing a drive from the drive carrier
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure that is listed in
Before working inside your system
.
3.
Remove a 3.5-inch drive carrier from the drive bay
.
Steps
Flex the drive bracket and remove the drive from the carrier.
44
PowerEdge T140 installing and removing system components