Dell PowerEdge T140 EMC Installation and Service Manual - Page 57
Expansion card installation guidelines, Removing a PCIe expansion card
View all Dell PowerEdge T140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
expansion cards section in the Dell EMC PowerEdge Servers Troubleshooting Guide at www.dell.com/ poweredgemanuals. Expansion card installation guidelines Table 8. PCI Express Generation 3 expansion cards supported PCIe Slot Height Length 1 Full Height Half Length 2 Full Height Half Length 3 Full Height Half Length 4 Full Height Half Length Link Width PCIe x 8 Gen3 PCIe x 8 Gen3 PCIe x 1 Gen3 PCIe x 4 Gen3 Slot Width x8 x16 x1 x8 NOTE: The expansion cards are not hot swappable. NOTE: For a system with 4 TB (or more) drive capacity, PERC is required for thermal control. The following table describes the installation order for installing expansion cards to ensure proper cooling and mechanical fit: The expansion cards with the highest priority must be installed first by using the slot priority indicated. Table 9. Expansion card installation order Card Categor Card Type Priorit y y Form Slot factor Priority 1 NIC 1-Gb NICs Quad Port Full 1, 2, 4 (Broadcom) Height Maximum Card width Card Allowed length 3 Single width Half length Card height Full height Maximum PCIe width x 4 2 NIC 1-Gb NICs Quad Port Full 1, 2, 4 3 (Intel) Height 3 NIC 1-Gb NICs Dual Port Full 1, 2, 3, 4 4 (Broadcom) Height 4 NIC 1-Gb NICs Dual Port Full 1, 2, 4 3 (Intel) Height Single width Half length Full height x 4 Single width Half length Full height x 1 Single width Half length Full height x 4 5 Internal PowerEdge RAID Full 2 1 Adapter Controller (PERC) Height H730P 6 Internal PowerEdge RAID Full 2 1 Adapter Controller (PERC) Height H330 7 Internal HBA330 Adapter Full 2 1 Height Single width Half length Full height x 8 Single width Half length Full height x 8 Single width Half length Full height x 8 8 External 12-GB SAS HBA Full 2 1 Adapter Height 9 Internal BOSS storage Full 1, 2, 4 1 Height Single width Half length Full height x 8 Single width Half length Full height x 2 Removing a PCIe expansion card Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. PowerEdge T140 installing and removing system components 57