Dell PowerEdge T140 EMC Installation and Service Manual - Page 92
NIC ports specifications, Serial connector specifications, Environmental specifications
View all Dell PowerEdge T140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
NIC ports specifications The Dell EMC PowerEdge T140 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports that are located on the back panel. Serial connector specifications The Dell EMC PowerEdge T140 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant. VGA ports specification The Dell EMC PowerEdge T140 system supports one 15-pin VGA port, on the back of the system. NOTE: The front VGA port is available only with the rack configuration. Video specifications The Dell EMC PowerEdge T140 system supports Matrox G200eR2 graphics card with 16 MB capacity. Table 20. Supported video resolution options Resolution 640x480 Refresh rate 60, 70 Color depth (bits) 8, 16, 24 800x600 60, 75, 85 8, 16, 24 1024x768 60, 75, 85 8, 16, 24 1152x864 60, 75, 85 8, 16, 24 1280x1024 60, 75 8, 16, 24 Environmental specifications NOTE: For additional information about environmental certifications, refer to the Product Environmental Datasheet located with the Manuals & Documents on www.dell.com/support/home. Table 21. Temperature specifications Temperature Storage Continuous operation (for altitude less than 950 m or 3117 ft) Fresh air Maximum temperature gradient (operating and storage) Specifications -40-65°C (-40-149°F) 10-35°C (50-95°F) with no direct sunlight on the equipment For information about fresh air, see the Expanded operating temperature section. 20°C/h (68°F/h) Table 22. Relative humidity specifications Relative humidity Storage Operating Specifications 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be noncondensing at all times. 10% to 80% RH with 29°C (84.2°F) maximum dew point. 92 Technical specifications