Dell PowerEdge T140 EMC Installation and Service Manual - Page 71
PSU P3 cable bundling, Installing the PSU, Next steps
View all Dell PowerEdge T140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Figure 44. PSU P3 cable bundling 2. Place the PSU in the system and slide it toward the back of the system until it is fully seated. 3. Tighten the screws to secure the PSU to the system. Figure 45. Installing the PSU Next steps 1. Connect all the power cables from the PSU to the system board connectors. 2. Follow the procedure listed in After working inside your system. PowerEdge T140 installing and removing system components 71
Figure 44. PSU P3 cable bundling
2.
Place the PSU in the system and slide it toward the back of the system until it is fully seated.
3.
Tighten the screws to secure the PSU to the system.
Figure 45. Installing the PSU
Next steps
1.
Connect all the power cables from the PSU to the system board connectors.
2.
Follow the procedure listed in
After working inside your system
.
PowerEdge T140 installing and removing system components
71