Dell PowerEdge T140 EMC Installation and Service Manual - Page 50
System memory, System memory guidelines
![]() |
View all Dell PowerEdge T140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Figure 22. Installing the optical drive Next steps 1. Connect the power cable and the data cable to the optical drive. NOTE: Route the cables properly to prevent them from being pinched or crimped. 2. Install the front bezel. 3. Follow the procedure that is listed in After working inside your system. System memory System memory guidelines Your system contains four memory sockets that are organized into two channels. In each channel, the first socket is marked white and the second socket black. 50 PowerEdge T140 installing and removing system components
![](/manual_guide/products/dell-poweredge-t140-emc-installation-service-manual-24d72dd/50.png)
Figure 22. Installing the optical drive
Next steps
1.
Connect the power cable and the data cable to the optical drive.
NOTE:
Route the cables properly to prevent them from being pinched or crimped.
2.
Install the front bezel
.
3.
Follow the procedure that is listed in
After working inside your system
.
System memory
System memory guidelines
Your system contains four memory sockets that are organized into two channels. In each channel, the first socket is marked white and the
second socket black.
50
PowerEdge T140 installing and removing system components