Dell PowerEdge T140 EMC Installation and Service Manual - Page 45
Installing a drive into the drive carrier
![]() |
View all Dell PowerEdge T140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Figure 15. Removing the drive from the drive carrier Next steps 1. Install the drive into the drive carrier. Installing a drive into the drive carrier Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. 3. Remove a 3.5-inch drive carrier from the drive bay. Steps 1. Align the screw holes on one side of the drive with the pins on the drive carrier. 2. Flex the side of the drive carrier, and place the drive into the drive carrier. PowerEdge T140 installing and removing system components 45
![](/manual_guide/products/dell-poweredge-t140-emc-installation-service-manual-24d72dd/45.png)
Figure 15. Removing the drive from the drive carrier
Next steps
1.
Install the drive into the drive carrier
.
Installing a drive into the drive carrier
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure that is listed in
Before working inside your system
.
3.
Remove a 3.5-inch drive carrier from the drive bay
.
Steps
1.
Align the screw holes on one side of the drive with the pins on the drive carrier.
2.
Flex the side of the drive carrier, and place the drive into the drive carrier.
PowerEdge T140 installing and removing system components
45