Dell PowerEdge T140 EMC Installation and Service Manual - Page 47
Installing the optical drive fillers
View all Dell PowerEdge T140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Steps 1. On the front bezel, press the retention clip of the optical drive filler and pull the filler out of the front bezel. Figure 17. Removing the optical drive filler from the front bezel 2. On the optical drive cage, hold the tabs on the optical drive filler and remove the optical drive filler from the optical drive cage. Figure 18. Removing the optical drive filler from the optical drive cage Next steps 1. Replace the optical drive filler or install the optical drive. Installing the optical drive fillers Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. 3. Remove the front bezel. NOTE: There are two optical drive fillers, plastic filler on the front bezel, and metal filler on the optical drive cage. Steps 1. On the front bezel, insert the tabs on optical drive blank into the slots and push the blank until it locks into place. PowerEdge T140 installing and removing system components 47