Dell PowerEdge T140 EMC Installation and Service Manual - Page 49
Installing the optical drive
![]() |
View all Dell PowerEdge T140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
2. Slide the optical drive out of the system. 3. If you are not installing a new optical drive, install the optical drive fillers. Figure 21. Removing the optical drive Next steps 1. Replace the optical drive. Installing the optical drive Prerequisites NOTE: Only slim 9.5-mm SATA DVD-ROM drive or DVD+/-RW drive can be installed in your system. External optical drives can be connected through USB ports. 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. 3. Remove the front bezel. Steps 1. Align the optical drive with the optical drive slot on the optical drive cage. 2. Slide the optical drive into the slot until the release tab snaps into place. PowerEdge T140 installing and removing system components 49
![](/manual_guide/products/dell-poweredge-t140-emc-installation-service-manual-24d72dd/49.png)