Dell XPS 720 Black Owner's Manual - Page 137
Removing the Optional Hard Drive Fan
View all Dell XPS 720 Black manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
3 2 1 1 rubber grommet (4) 2 CPU fan 3 processor airflow shroud 2 Replace the processor airflow shroud (see "Installing the Processor Airflow Shroud Assembly" on page 129). 3 Connect the fan cable to the FAN1_CPU connector on the system board (see "System Board Components" on page 89). 4 Replace the computer cover (see "Replacing the Computer Cover" on page 159). NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into your computer. 5 Connect your computer and devices to electrical outlets, and then turn them on. Removing the Optional Hard Drive Fan 1 Follow the procedures in "Before You Begin" on page 85. 2 Remove the computer cover (see "Removing the Computer Cover" on page 86). 3 Remove all installed memory modules (see "Removing Memory" on page 93). 4 Disconnect the fan cable from the FAN_HDD connector on the system board (see "System Board Components" on page 89). 5 Press the release latch on the hard drive fan and slide it out from between the hard drive bays, then lift it from the computer. Removing and Installing Parts 137