Dynex DX-24LD230A12 User Manual (English) - Page 14

10 DX-24LD230A12 Making connections Using composite video cable (good) To connect a cable or satellite box using composite video: 1 Turn off your TV/DVD combo and all connected equipment. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an A/V cable (not provided) to the VIDEO IN/VIDEO 1, and L, R jacks on the back of your TV/DVD combo and to the composite video and audio out jacks on the cable or satellite box. Cable or satellite box Using coaxial cable (good) To connect a cable or satellite box using coaxial cable: 1 Turn off your TV/DVD combo and all connected equipment. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV/DVD combo and to the coaxial out jack on the cable or satellite box. Cable or satellite box A/V cable Coaxial cable Cables are often color-coded to match color-coded jacks. Back of TV/DVD combo PB PR 4 Turn on your TV/DVD combo, then turn on the cable or satellite box. 5 Go through the setup wizard described on page 16. 6 To watch TV, press INPUT to open the INPUT SOURCE list, then press INPUT repeatedly, or press or to select A/V, then press ENTER/ . Back of TV/DVD combo PB PR 4 Turn on your TV/DVD combo, then turn on the cable or satellite box. 5 Go through the setup wizard described on page 16. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables.