Dynex DX-24LD230A12 User Manual (English) - Page 8

4 DX-24LD230A12 Installing the stand or wall-mount bracket Installing the stand or wall-mount bracket Notes • • If you plan to wall-mount your TV/DVD combo, do not install the stand. Store the stand and stand screws in case you decide to use the stand in the future. Installing the stand To install the stand: 1 Carefully place your TV/DVD combo screen face-down on a cushioned, clean surface to protect the screen from damage and scratches. Installing a wall-mount bracket Warning This apparatus is intended to be supported by a UL Listed wall mount bracket. To attach your TV/DVD combo to a wall-mount bracket: 1 Carefully place your TV/DVD combo screen face-down on a cushioned, clean surface to protect the screen from damage and scratches. 2 Remove the two screws that secure the stand to the TV/DVD combo, then remove the stand. 2 Align the screw holes on the stand with the holes on the bottom edge of the TV/DVD combo. 3 Attach the wall-mount bracket to your TV/DVD combo using the mounting holes on the back of your TV/DVD combo. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV/DVD combo. Note The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. 7.87 in. (200 mm) 3.94 in. (100 mm) 3 Secure the stand to the TV/DVD combo with the two screws (provided). Wall mount brackets