Epson ActionTower 3000 User Manual - Page 36
Exiting SETUP, Post-SETUP Procedures, To leave SETUP, press E
View all Epson ActionTower 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Exiting SETUP When you leave SETUP, you can save your settings, or exit SETUP without saving your settings. You can also return all values to the factory defaults. To leave SETUP, press ESC from any SETUP screen. From the Main Menu, you can do the following: Load ROM Default Values Load Values from CMOS Save Values to CMOS Loads the factory default settings stored in ROM back into CMOS. If you change your system configuration and then have problems, you can load the ROM values to boot the system and start over. Loads the current values stored in CMOS for all SETUP options. This ignores any changes you have made using SETUP. Saves the configuration changes you have made to CMOS. Post-SETUP Procedures After you run SETUP for the first time, you may need to install the operating system if your computer is not preconfigured. See your operating system manual for instructions. Once you have installed your operating system, install any software you plan to use. See your application program manuals for instructions. 1-20 Setting Up Your System