Epson ActionTower 3000 User Manual - Page 62
remain as stationary as possible while you install them.
![]() |
View all Epson ActionTower 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
The table below lists the video DRAM DIP chips that are approved for use in your computer. video DRAM DIP chip types Manufacturer Goldstar Fiji NMBS Toshiba Samsung Fart number GM71 C256A-70/80 MB81 C256A-70/80 AAA1M204P-70/50 TC514256AP-7/8 KM44C256BP-7/8 Note that your video memory sockets may not look exactly like the ones shown here. If you're not sure how to install video memory chips, contact the EPSON Connection and ask for assistance. 1. Locate the video memory sockets on the main system board, shown on page 3-5. 2. If there is an option card in your way, remove it. See page 3-18 for instructions. Caution To avoid generating static electricity and damaging the memory chips, ground yourself by touching the metal surface on the inside of the computer's back panel. Then remain as stationary as possible while you install them. 3. Remove the memory chips from their package and inspect each one. The pins should point inward at slightly less than a 90° angle. If any of the pins are not in this position, use your fingers or small tweezers to gently align them with the other pins. Be careful; the pins are fragile and can break off easily. Installing and Removing Options 3-19
![](/manual_guide/products/epson-actiontower-3000-user-manual-68dffb2/62.png)