Epson ActionTower 3000 User Manual - Page 82
Removing Drives, computer's cover described in and see
![]() |
View all Epson ActionTower 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
5. Now locate one of the power supply cables that lead from the power supply. (They have multi-colored wires and a plastic connector on the end.) Align the notched comers of the ribbon cable's connector and the drive's power connector; then push in the connector. 6. If you have finished installing or removing drives, replace the computer's cover (described in Chapter 3) and see page 421 for post-installation instructions. 4-12 Installing and Removing Drives
![](/manual_guide/products/epson-actiontower-3000-user-manual-68dffb2/82.png)
5.
Now locate one of the power supply cables that lead from the
power supply. (They have multi-colored wires and a plastic
connector on the end.) Align the notched comers of the
ribbon cable’s connector and the drive’s power connector;
then push in the connector.
6.
If you have finished installing or removing drives, replace the
computer’s cover (described in Chapter 3) and see page
421 for post-installation instructions.
4-12
Installing and
Removing Drives