Epson ActionTower 3000 User Manual - Page 52

pins and gently move it to the desired position or remove

Get Epson ActionTower 3000 PDF manuals and user guides View all Epson ActionTower 3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

3. Also, you may need to remove the rear internal drive bay bracket to access the jumpers. (If there is a drive mounted in this bracket, you'll need to remove it first; see Chapter 4 for instructions.) Remove the four screws that hold the bracket to the back of the system, as shown below. 4. Rest the computer on its side, so that the system board is horizontal and the components on the board are easy to reach. 5. Use needle-nose pliers or tweezers to pull the jumper off its pins and gently move it to the desired position or remove it from the computer. Caution Be careful not to bend the jumper pins or damage any surrounding components on the main system board. 6. Replace the rear internal drive bay bracket, if necessary. 7. Replace any option cards you removed; see page 3-15. Installing and Removing Options 3-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
3.
Also, you may need to remove the rear internal drive bay
bracket to access the jumpers. (If there is a drive mounted
in this bracket, you’ll need to remove it first; see Chapter 4
for instructions.) Remove the four screws that hold the
bracket to the back of the system, as shown below.
4.
Rest the computer on its side, so that the system board is
horizontal and the components on the board are easy to
reach.
5.
Use needle-nose pliers or tweezers to pull the jumper off its
pins and gently move it to the desired position or remove it
from the computer.
Caution
Be careful not to bend the jumper pins or damage any
surrounding components on the main system board.
6.
Replace the rear internal drive bay bracket, if necessary.
7.
Replace any option cards you removed; see page 3-15.
Installing and Removing Options
3-9