Epson ActionTower 3000 User Manual - Page 56
force it; pull it all the way out and try again., of the SIMM socket. If it does not go in smoothly
![]() |
View all Epson ActionTower 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
6. Push the SIMM into the socket until it is seated firmly in the slot. Then tilt it upright, as shown below, guiding the hole at each end of the SIMM over the retaining post at each end of the SIMM socket. If it does not go in smoothly, do not force it; pull it all the way out and try again. Installing and Removing Options 3-13
![](/manual_guide/products/epson-actiontower-3000-user-manual-68dffb2/56.png)
6.
Push the SIMM into the socket until it is seated firmly in the
slot. Then tilt it upright, as shown below, guiding the hole
at each end of the SIMM over the retaining post at each end
of the SIMM socket. If it does not go in smoothly, do not
force it; pull it all the way out and try again.
Installing and Removing Options
3-13