Epson F2000 Users Guide - Page 140

LCD screen message Head Cleaning Set Life Replace head cleaning set. Press OK to move platen back, then start replacement. See manual to clean scale and change air filter. USB Memory Error Failed to read USB memory. USB Memory Error Failed to write to USB memory. Platen Move Error Abnormal platen move detected. Check platen path and press the cancel button Condition/solution Replace the head cleaning set (wiper unit, anti-drying caps, and flushing pad). Be sure to replace all components at the same time. Clean the encoder strip (carriage scale) and replace the air filter. One of the following conditions may have occurred: • The USB memory device was removed while the printer was reading the data • The selected file is corrupted • The USB memory device's format type or the file format may not be supported (FAT32) Check the light and make sure that the USB memory device is not being accessed before removing it from the printer. One of the following conditions may have occurred: • The USB memory device is damaged • The USB memory device was removed while the printer was writing to it • There is not enough free space on the memory device or the number of saved files has reached the maximum Check that the USB memory device is not damaged and that there is enough free space. A foreign object was detected in the platen's path. Check for objects in the platen's path and under the movable base. If necessary, open the printer cover to check inside the printer. Then close the printer cover. 140