Epson F2000 Users Guide - Page 35
Preparing Your Printer, Application area size, Temperature, Pressure, Parent topic
View all Epson F2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
The fixing conditions vary depending on the amount of pre-treatment solution used. The following guidelines are approximate. Note: If the pre-treatment solution is not completely dry after the suggested amount of time, extend the duration while carefully checking if the pre-treatment solution is dry. If traces of the pre-treatment solution are still visible, try using water to wash them off. Application area size Letter/A4 and smaller Larger than letter/A4 Temperature 338 °F (170 °C) Time 45 seconds 45-90 seconds Pressure 6 Psi Note: Optimum conditions may vary depending on the type of heat press used; make sure to test in advance to determine the correct conditions for your heat press. Parent topic: Pre-treating a T-shirt Preparing Your Printer Before transmitting print data from the Garment Creator software, check the printer's status and make sure that the print head nozzles are not clogged. 1. Turn on the printer. 35