Epson F2000 Users Guide - Page 60
Printing on Thick Material, Removing the Round Platen Height Indicator
View all Epson F2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Printing on Thick Material Before printing on thick material such as sweatshirts, you may need to lower the height of the printing surface. Lower the height by an additional 0.4 inch (10 mm) by removing the round platen height indicator attached beneath the height adjustment lever before loading the thick material. Note: Also remove the round platen height indicator when using a sleeve platen. Removing the Round Platen Height Indicator Installing the Round Platen Height Indicator Removing the Round Platen Height Indicator Lower the height of the printing surface by removing the round platen height indicator attached beneath the height adjustment lever. 1. If the platen is not in the forward position, press the moveable base button to move the platen forward. 2. Turn off the printer. 3. Hold the left and right sides of the platen and lift it off of the printer. 60