Epson F2000 Users Guide - Page 32
Pre-treatment Application Guidelines, Pre-treating a T-shirt
View all Epson F2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Note: Use pre-treatment solution that is diluted more than 2 times if uneven colors occur after fixing the ink (such as layering color ink over White ink), or when pre-treatment solution leaves a trace. When fixing ink with a heat tunnel Garment color All colors Dilution ratio Start with 1:2 (pre-treatment solution:water) and test increasing water up to 1:3) Parent topic: Pre-treating a T-shirt Related references Fixing the Pre-treatment Solution (Heat Press) Pre-treatment Application Guidelines Before applying pre-treatment solution to the entire T-shirt, make sure to test it on a non-visible area first. Apply the diluted pre-treatment solution to the T-shirt with a roller or use the spray method according to these guidelines. Fixing method Heat press Heat tunnel Amount of diluted solution to apply Apply 0.0054 to 0.0073 ounce per square inch (0.16 to 0.21 g per square inch) Apply 0.0054 ounce per square inch (0.16 g per square inch) Note: If fixing the ink with a heat tunnel, you need to use a heat press to fix the pre-treatment solution. Parent topic: Pre-treating a T-shirt Related references Fixing the Pre-treatment Solution (Heat Press) Related tasks Pre-treating a T-shirt with a Roller Pre-treating a T-shirt with a Sprayer 32