Epson F2000 Users Guide - Page 34
Fixing the Pre-treatment Solution (Heat Press), Pre-treating a T-shirt
View all Epson F2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2. Place the T-shirt on a flat surface. 3. Spray the pre-treatment solution evenly over an area larger than the target print area. Note: Run a roller over the area after spraying for an even application of the pre-treatment solution. 4. Fix the pre-treatment solution with a heat press, if necessary. Note: The T-shirt fibers must be pressed flat to produce even whiteness. If you use a heat tunnel to fix the ink, use a heat press to fix the pre-treatment solution. Parent topic: Pre-treating a T-shirt Related references Fixing the Pre-treatment Solution (Heat Press) Related tasks Diluting the Pre-treatment Solution Fixing the Pre-treatment Solution (Heat Press) If you are using a heat tunnel to fix the ink, you must use a heat press before printing to remove creases from the T-shirt and to fix the pre-treatment solution. Always place a heat-resistant release sheet, such as silicon paper, between the T-shirt and the heat press. Note: Do not wet the T-shirt or leave it in a humid location for a long time after fixing the pre-treatment solution, or White ink may absorb into the wet sections and cause unevenness in color. If the T-shirt is left for an extended period of time in a humid location, press it for 5 to 10 seconds just before printing. 34