Epson FX 1170 Service Manual - Page 14
REV.-A, Iti-part, Table 1-1. Line Feed Speed - + manual
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
REV.-A Table 1-1. Line Feed Speed(1 iine = 1/6") Intermittent feed Continuous feed Type of paper Thin ms Thick ms Thin ms (ips) Thick ms (ips) Fanfold paper 77 85 55 (3.0) 66 (2.5) Cut sheet (manual) 69 77 45 (3.7) 55 (3.0) Cut sheet (CSF) 71 77 48 (3.5) 55 (3.0) * Thin: Thick: Thickness is less than or equal to 0.18 mm. Thickness is more than 0.18 mm. ***** precautions for Handling Paper ***** 1 ) Friction feed q Set the release lever to the FRICTION position. q Load the paper from the front or top entrance. q Do not use continuous paper. q Do not perform any reverse paper feeds within the top 8.5 m m area and bottom 22 mm area. q Do not perform reverse feeds greater than 1/6" after the paper end has been detected. q Use the paper-tension unit. q Insert the multi-part cut sheet forms only from the front. 2) Push tractor feed q Set the release lever to the REAR PUSH/FRONT PUSH position. q Load the paper from the rear or front entrance. q Release the friction feed mechanism. q M u Iti-part paper must be carbonless. q Use the paper-tension unit. q Do not perform reverse feeds greater than 1/6". q Do not perform reverse feeding after the paper end has been detected, because accuracy of paper feed cannot be assured. 1-5