Epson FX 1170 Service Manual - Page 15
Paper Specifications, Table 1-2. Specifications for Cut Sheets Plain Paper
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
REV.-A 3) Pull tractor feed q Set the release lever to the PULL position. q Load the paper from the front, rear, or bottom entrance. (The front or bottom entrance is recommended for thick paper or labels.) q Release the friction feed mechanism. q Remove the paper-tension unit and attach the pull tractor unit. q Insert the paper from either front or bottom. q Multi-part paper must be carbonless. q Do not perform reverse feeds. 4) Push-pull tractor feed q Set the release lever to the REAR PUSH/FRONT PUSH position. q Load the paper from the front or rear entrance. q Release the friction feed mechanism. q Remove the paper-tension unit and attach the pull tractor unit. c Remove any slack in the paper between the platen and the pull tractor. s Precisely adjust the horizontal position of the pull tractor and push tractor. q Multi-part paper must be carbonless. q Do not perform reverse feeds greater than 1/6". q Do not perform reverse feeds after the paper end has been detected. 1.2.1.3 Paper Specifications See Tables 1-2, 1-3, 1-4, 1-5, 1-6, and 1-7. Recycled paper, envelopes, and labels require the following environmental conditions. Normal environment Temperature: 15-25 deg. C (59-68 deg. F) Humidity: 30-60 ?!. RH Table 1-2. Specifications for Cut Sheets (Plain Paper) ~....- q "- Width top insertion 148-257 mm (5.8-10.1") 80-column 148-420 mm (5.8-16.5") 136-column front insertion 182-257 mm (7.2-10.1") 80-column 182-364 mm (7.2-14.3") 136-column Length Up to 364 mm (14.3") Thickness 0.065-0.14 mm (0.0025-0.0055") Weight 14-24 lb (45-78 Kg) (52.3-90 g/m2) Quality Plain paper Recycled paper (in normal environment) 1-6