Epson FX 1170 Service Manual - Page 56
Paper Path for Friction Feeding Using the Top Entrance, Paper Tension Roller
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
REV.-A 2.1.4.3 Paper Paths This section describes the various paths the paper follows through the printer mechanism. The various paper paths are divided into four groups depending on the entrance(toPt rear, bottomf or front) the PaPer is fed from" Note: The front PE (paper-end) detector is located in front of the printer mechanism and the rear PE detector is located behind the printer mechanism. (1) Top entrance Figure 2-12 shows the paper path for friction feeding using the top entrance. The top entrance is used only for friction feed method. When the top entrance is used, the rear PE detector senses when the paper is out. Paper (Cut Sheet) Paper Tension Roller Detector, PE (Rear) Paper Guide Rollers Figure 2-12. Paper Path for Friction Feeding Using the Top Entrance 2-13