Epson FX 1170 Service Manual - Page 84
Removing the PRINTER MECHANISM, STEP 21, Remove the PAPER GUIDE ASSEMBLY, top cover, front cover
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
3.2.5 Removing the PRINTER MECHANISM REV.-A [STEP 11 [STEP 21 [STEP 31 [STEP 41 [STEP 51 [STEP 61 [STEP 71 Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover and tractor unit. (See Section 3.2.1.) Remove the PANEL UNIT. (See Section 3.2.2.) Remove the HOUSING ASSEMBLY, UPPER. (See Section 3.2.4.) Remove the four CBB (M4X12) screws securing the PRINTER MECHANISM. Remove the CBS (M3X6) screw securing the INTERFACE COVER. Disconnect the following connectors on the BOARD ASSEMBLY, MAIN: CN3 (2-pin# Blue)/ CN4 (2pin, White), CN5 (2-pin, Black), CN6 (6-pin), CN7 (2-pin, yellow), CN8 (ld-pinh CN9 (S-pin)r CN12 (lO-pin), and CN13 (5-pin). Remove the PRINTER MECHANISM. CBB (M4X12) h + 1 la '\ I?''CBS(M3X6) ~ INTERFACE COVER &. , '9 PRINTER MECHANISM Figure 3-7. Removing the PRINTER MECHANISM 3-9