Epson FX 1170 Service Manual - Page 35
Printer Initialization, The READY LED lights.
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
REV.-A Position 1 (3rd step) &'"$\\ -=. . . r' Platen Gap Adjust Lever 4.- Q Figure 1-10. Lever Positions 1.5.12 Printer Initialization The printer is initialized in the following cases. (1) When the printer is turned on. (2) When the INIT signal or CMREQ (optional l/F ) is input. When the printer is initialized, it performs the following functions: q The printhead returns to the leftmost position (carriage home). q The READY LED lights. q The printer clears the print buffer and input data buffer. q The line spacing is set to 1/6 inch. q The page length and skip over perforation settings are returned to their default values. q All vertical tab positions are cleared. q The horizontal tab positions are set to every 8 columns. q The print mode is set to the default value set from the control paneI and stored in non-volatile memory. TOF position will be reset in the following cases. (1) Power on (2) INIT signal or CMREQ (optional I/F) (3) Sofiware reSet command (ESC @) (4) Page length command (ESC C) NOTE: The CMREQ signal goes Low when the command request is sent from the optional card to the main system. 1-26