Epson FX 1170 Service Manual - Page 89
Remove the MOTOR ASSEMBLY, CR. See
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
REV.-A 3.2.5.5 Disassembling the GEAR TRAIN, PF ,. [STEP 1] [STEp 21 [STEp 31 [STEP 41 [STEP 51 [STEP 61 [STEP 71 [STEP 81 Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover and tractor unit. (See Section 3.2.1.) Remove the PANEL UNIT. (See Section 3.2.2.) Remove the HOUSING ASSEMBLY, UPPER. (See Section 3.2.4.) Remove the PRINTER MECHANISM. (See Section 3.2.5.) Remove the MOTOR ASSEMBLY, CR. (See Section 3.2.5.3.) Remove the MOTOR ASSEMBLY, PF. (See Section 3.2.5.4.) Remove the FFC cables from the FRAME, SUB, RIGHT of the PRINTER MECHANISM, and then remove the two CBS (M3X8) screws securing the FRAME, SUB, RIGHT. Remove the FRAME, SUB, RIGHT. '1 CAM, CLUTCH, TRACTOR FFC Cables Figure 3-13. Disassembling the GEAR TRAIN, PF 8- --! f:...' Assembly Note Be sure to properly mesh the LEVER, RELEASE with the mechanism. Figure 3-14, Positioning the LEVER, RELEASE for Insertion 3-14