Epson FX 1170 Service Manual - Page 93
Step 21
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
REV.-A 3.2.5.8 Removing the Home Position (HP) DETECTOR .,.%,> c [STEP 11 Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover, and tractor unit. (See Section 3.2.1.) [STEp 21 Remove the clip of the DETECTOR, HP. Remove the detector. [STEp 31 Disconnect the LEAD, HP from the DETECTOR, HP. i!- Figure 3-18. Removing the DETECTOR, HP 3.2.5.9 Removing the Platen Gap (PG) DETECTOR [STEP 11 [STEP 21 [STEP 31 [STEP 41 [STEP 51 [STEP 61 Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover, and tractor unit. (See Section 3.2.1.) Remove the PANEL UNIT. (See Section 3.2.2.) Remove the HOUSING ASSEMBLY, UPPER. (See Section 3.2.4.) Remove the PRINTER MECHANISM. (See Section 3.2.5.) Remove the two clips of the DETECTOR, PG attached to the LEFT FRAME of the PRINTER MECHANISM. Remove the detector. Disconnect the LEAD, PG from the DETECTOR, PG. Figure 3-19. Removing the DETECTOR, PG 3-18