Epson FX 1170 Service Manual - Page 99
Removing the BOARD ASSEMBLY, WARNING, UPPER.,
View all Epson FX 1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
REV.-A 3.2.7 Removing the BOARD ASSEMBLY, C076 PSB/PSE :.+ [ WARNING Do not touch the heat sink attached to the FET (Ql) when the printer is powered. If you touch the heat sink, you may suffer from electric shock. [STEP 1] Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover and tractor unit. (See Section 3.2.1.) [STEP 2] Remove the PANEL UNIT. (See Section 3.2.2.) [STEP 3] Remove the HOUSING ASSEMBLY, UPPER. (See Section 3.2.4) [STEP 4] Remove the PRINTER MECHANISM. (See Section 3.2.5.) [STEP 5] Remove the three CBB (M3X12) screws and the two CBC (M3X8) screws on the BOARD ASSEMBLY, C076 PSB/PSE. Remove the connectors CN1 (2-pin) and CN2 (1 l-pin). [STEP 61 Remove the BOARD ASSEMBLY, C076 PSB/PSE. ?' CBC (M3X8) ?-3 I.f.,--,..='. Figure 3-26. Removing the BOARD ASSEMBLY, C076 PSB/PSE 3-24