Epson Perfection 636 User Manual - Page 51

The scanner does not start scanning., The scanner software does not work properly., PEPSON TWAIN3

Get Epson Perfection 636 - Scanner - PC/Mac PDF manuals and user guides View all Epson Perfection 636 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

The scanner does not start scanning. Problem Solution The scanner is not turned on. Press the P operate button to turn on the scanner. The interface board is Make sure that you have selected the correct interface port and settings not correctly installed. with your software. Also make sure the interface board in your computer is properly installed. Make sure that the terminator and SCSI ID are correctly set up. If you have other expansion boards in your computer, make sure that they are not interfering with the interrupt setting of the interface board for your scanner. (See your computer documentation.) The scanner software does not work properly. Problem Solution The scanner software was not installed correctly or has been corrupted. Be sure you have correctly installed your software or re-install your software. You have not selected For your TWAIN source, select Perfection 636 (32-bit) if you are using a TWAIN source. LaserSoft or EPSON TWAIN3 if you are using EPSON TWAIN. Troubleshooting Page 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
Troubleshooting
Page 51
The scanner does not start scanning.
The scanner software does not work properly.
Problem
Solution
The scanner is not
turned on.
Press the
P
operate button to turn on the scanner.
The interface board is
not correctly installed.
Make sure that you have selected the correct interface port and settings
with your software. Also make sure the interface board in your computer
is properly installed.
Make sure that the terminator and SCSI ID are correctly set up.
If you have other expansion boards in your computer, make sure that
they are not interfering with the interrupt setting of the interface board for
your scanner. (See your computer documentation.)
Problem
Solution
The scanner software
was not installed
correctly or has been
corrupted.
Be sure you have correctly installed your software or re-install your
software.
You have not selected
a TWAIN source.
For your TWAIN source, select
Perfection 636 (32-bit)
if you are using
LaserSoft or
EPSON TWAIN3
if you are using EPSON TWAIN.