Epson Perfection 636 User Manual - Page 53
Part of the image is distorted or blurred., Edges of the document are not scanned.
View all Epson Perfection 636 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Part of the image is distorted or blurred. Problem Solution Your document is not flat. Make sure your document is in good condition. Part of the document may be wrinkled, warped, or not in contact with the document table. Be sure the document is uniformly flat. Edges of the document are not scanned. Problem Solution Your document is too large. The document table has non-readable areas around the edges. If part of your document extends beyond the maximum limits marked on the document table edge guides, you may have to reposition your document so that the image you want to scan is within the readable area. Color is patchy or distorted at the edges of the image. Problem Solution Your document is not flat. If the document is very thick or warped at the edges, the edges of the image may be discolored. Cover the edges of the document with opaque paper to block outside light. Your document is too large. If part of the document extends beyond the document table, that edge may not be in contact with the document table. Change the position of the document. Troubleshooting Page 53